Wacker Neuson 5000620856, Руководство оператора, Страница: 95 / 144

ghi_tx001260gb_FM10.fm
95
HI750 Maintenance
9 Maintenance
9.1 Periodic Maintenance Schedule—Oil Burners
The table below lists basic machine maintenance. Tasks designated with check
marks may be performed by the operator. Tasks designated with square bullet
points require special training and equipment.
Task
Interval*
(hours of service)
Daily 6 Months Yearly
--- (1000) (1200)
Check fuel level.

Clean the machine.

Inspect electrical components.

Inspect the blower motor and belt.
Replace the belt if necessary.

Inspect the heat exchangers.

Replace the burner nozzle.

Replace the fuel filter.

Clean the CAD cell.

Lubricate the pillow block bearings.
1  
Inspect and test the burner.
As needed or upon changing job sites;
see chapter Burner Setup .
■
Inspect burner electrodes; replace burner
electrodes if necessary.
■
Check the “Z” distance.
■
Check the air settings.
■
Check the fuel pressure.
* Use whichever comes first, calendar time or service hours.
1
Adjust frequency depending on work site and operating conditions.