Wacker Neuson 5000620856, Руководство оператора, Страница: 110 / 144

ghi_tx001260gb_FM10.fm
110
Maintenance HI750
9.11 Connecting and Maintaining the Battery
Battery
connections To connect the battery:
1. Place all electrical switches in the OFF position.
2. Connect the positive (+) battery cable to the battery.
3. Connect the negative (-) battery cable to the battery.
To disconnect the battery:
1. Stop the engine.
2. Place all electrical switches in the OFF position.
3. Disconnect the negative (-) battery cable from the battery.
4. Disconnect the positive (+) battery cable from the battery.
Maintaining
the battery
■
Follow the battery manufacturer’s maintenance recommendations.
■
Keep battery terminals clean and connections tight.
■
When necessary, tighten the cables and grease the cable clamps with
petroleum jelly.
■
Maintain the battery at full charge to improve cold weather starting.
Precautions Observe the following precautions to prevent serious damage to the electrical
system.
■
Do not disconnect the battery while the machine is running.
■
Do not attempt to run the machine without a battery.
■
Do not attempt to jump-start the machine.
■
In the event that the machine has a discharged battery, either replace the
battery with a fully charged battery or charge the battery using an appropriate
battery charger. See chapter
Technical Data for the equivalent battery
specification.
■
Dispose of waste batteries in accordance with local environmental regulations.
WARNING
Explosion hazard. Batteries can emit explosive hydrogen gas.
►
Keep all sparks and flames away from the battery.
►
Do not short-circuit battery posts.
WARNING
Battery fluid is poisonous and corrosive.
►
In the event of ingestion or contact with skin or eyes, seek medical attention
immediately.