Wacker Neuson 5000620856, Руководство оператора, Страница: 78 / 144

ghi_tx001315gb_FM10.fm
78
Burner Setup—Diesel HI750
7.6 Adjusting the Air Settings
Factory
settings
■
Air band: 5
■
Air shutter: 5
These settings are initial settings only. Adjust the air settings as necessary to
obtain the proper smoke spot and combustion analysis values.
Background There are two parts to adjusting the air setting: 1) air band; and 2) air shutter.
Adjust the air band to make large adjustments. Adjust the air shutter to make small
adjustments.
Effects The air setting has the following effects on combustion.
■
Higher O
2
percentage (excess air settings) lowers soot production but raises
stack temperature and reduces efficiency: lean mixture.
■
Lower O
2
percentage (inadequate air settings) increases efficiency and lowers
stack temperature but may cause soot build-up: rich mixture.
Procedure Perform the procedure below to adjust the air settings.
1. Initial setting of the air damper should be performed with the machine shut
down.
2. Loosen the air band locking screw (a) and the air shutter locking screw (b) .
3. Using the air band position pointer (c) to determine position, rotate the air band
to a higher number to increase air volume. Rotate it to a lower number to
decrease air volume.
4. Using the shutter position pointer (d) to determine position, move the air shutter
to a higher number on the shutter position pointer to increase air volume. Turn it
to a lower number to decrease air volume.
5. After the air settings have been made, tighten the band-locking screw (a) and
the shutter-locking screw (b) .
Result The air settings have now been adjusted.
wc_gr008323
b
c
a
d
wc_gr008324
c
d