Wacker Neuson 5000620856, Руководство оператора, Страница: 12 / 144

ghi_si000355gb_FM10.fm
12
Safety Information HI750
1.2 Machine Description and Intended Use
Machine
description The HI750 Heaters are indirect-fired air heaters available in oil (diesel) burner and
natural gas or liquid propane (LP) burning models. The machine consists of the
following components:
■
Combustion chamber and heat exchanger
■
Centrifugal blower
■
Single-stage burner
■
High-temperature shut-down switch(es)
■
Fuel tank on diesel burning models
■
Trailer on mobile units
■
Generator on mobile units
Fuel is consumed in a closed combustion chamber. Room air or outside air
(depending on the application) is pulled in by the centrifugal blower and blown over
the hot heat exchanger. This clean, dry, hot air is then blown into the space to be
heated by the centrifugal blower. Access to the blower assembly is protected by a
guard fitted on the air inlet.
Intended use The HI750 Heaters are intended to provide heat on outdoor sites and in other
rugged applications.
This machine has been designed and built strictly for the intended use described
above. Using the machine for any other purpose could permanently damage the
machine or seriously injure the operator or other persons on the work site. Machine
damage caused by misuse is not covered under warranty.
■
If your machine includes a generator, do not operate it indoors.
■
If your machine does not include a generator, it may be operated indoors, but
only when it has proper exhaust venting designed for indoor use, which meets all
applicable regulations.
This machine has been designed and built in accordance with the latest global
safety standards. It has been carefully engineered to eliminate hazards as far as
practicable, and to increase operator safety through protective guards and labeling.
However, some risks may remain even after protective measures have been taken.
They are called residual risks. On this machine, they may include exposure to:
■
exhaust emissions
■
hot surfaces such as exhaust vents
■
fuel and fuel fumes when refueling
■
high voltages and arc flash
To protect yourself and others, thoroughly read and understand the safety
information presented in this manual before operating the machine.