W6 N 8000 Exklusive, Инструкция по эксплуатации

Страница: 54 / 176

Inserting a plastic bobbin in the hook race
Inserting the bobbin
2. Insert the plastic bobbin with the “C” shape into the hook race.
3. Using the index finger on your right hand, hold the plastic bobbin tight and
guide the thread through the slot of the hook race keeping it taut.
The slot is located at the 7 o'clock position.
4. Proceed by holding the plastic bobbin with the index finger on your right hand
and guide the thread to the left around the hook race (9 o'clock position)
keeping it taut.
The thread slides between the tension springs with a soft click (slot 7 o’clock
and 9 o'clock position).
Pull the lower thread through the light grey slot on the thread cutter where
the lower thread is cut.
54