W6 N 8000 Exklusive Скачать руководство пользователя страница 12

Страница: 12 / 176

Unplugging the power plug

Assembling the machine

Set the

on / off switch

to the “I” (ON) position.

➔

The machine is switched on.

➔

The lighting is switched on.

The machine does not sew?

The machine is not connected correctly.

➔

Switch the machine off again.

➔

Check all plug connections.

Slowly press the

foot controller

to start sewing.

The further the

foot controller

is pressed, the faster the machine

sews.

Release the

foot controller

when you want to stop sewing.

Set the

on / off switch

to the “0” (OFF) position to switch the machine off.

» The machine is connected.

2.4

Unplugging the power plug

In the following situations you should switch the machine off at the

on / off

switch

and pull the plug out of the socket:

•

If the machine is left unattended.

•

If you are replacing the needle or bobbin.

•

If you are removing the covers.

•

If a power failure occurs during use.

•

During thunderstorms.

Содержание N 8000 Exklusive

















































































































































































Результаты поиска

Содержание N 8000 Exklusive

Отзывы:

Бренды по названию

Популярные бренды

W6 N 8000 Exklusive, Инструкция по эксплуатации

Результаты поиска

Содержание N 8000 Exklusive

Отзывы:

Бренды по названию

Популярные бренды