41
Maintenance
reInstall tHe round brusH and brusH coVer:
•
To reinstall the round brush and the brush cover, follow the steps to remove the
round brush in the reverse order.
•
Ensure that the latch engages audibly when you insert the brush cover.
7
.
4.4
cleaning the sensors
Warning! Risk of electric shock!
•
Always switch off the device and disconnect the mains plug before all
changeover, cleaning and maintenance tasks.
Notice! Risk of malfunction!
•
Clean the sensors regularly. Recommendation: each time the dust
container is cleaned.
•
Clean the floor sensors
1
on the underside of the Kobold VR200
robot vacuum with a cotton swab or a soft, clean cloth, but never with pointed
or sharp objects.
If the area of the sensors is very dirty, it can also be cleaned with a vacuum
cleaner.
•
Clean the wall following sensor
2
on the right side with a cotton swab or a
soft, clean cloth.
•
Clean the ultrasound sensors
3
on the front of the Kobold VR200 robot
vacuum with a cotton swab or a soft, clean cloth, but never with pointed or
sharp objects.
Figure 4.8 Audible latching of the
brush cover
7
7
klick
click
klick
click
1
2
3
Figure 4.9 Clean sensors
Содержание KOBOLD VR200
