38
Maintenance
Of course the dust container can also be cleaned manually:
•
Remove the dust container
5
from the dust compartment
6
of the robot
vacuum. In order to do so, pull the dust container out by the green
4
tab.
•
Open the dust container by taking out the filter on its narrow side. In order to
do so, pull the filter out of the dust container by the green lug
8
of the filter
frame
7
.
•
Empty out the contents of the dust container with the help of a brush, or clean
it out with your conventional vacuum cleaner.
4.1.2 cleaning the fi lter
The pleated fi lter material is covered by a pre-fi lter to protect it against severe
contamination and damage. However, fi ne dust and fi bres may accumulate aft er
some time between the pre-fi lter and the pleated fi lter material. Therefore, we
recommend cleaning the fi lter regularly with your vacuum cleaner.
•
Remove the filter by pulling it out of the dust compartment by the green lug of
the filter frame.
•
Vacuum both sides of the filter
9
and/or clean it with a soft, dry cloth.
The fibres remaining under the pre-filter do not impair the performance
of the filter as a whole. For optimum cleaning performance, we recom-
mend replacing the filter with a new one once a year.
Figure 4.2 Removing the dust container
4
5
6
Figure 4.3 Removing the fi lter
7
8
9
Figure 4.4 Cleaning the fi lter
Содержание KOBOLD VR200
