Vorwerk KOBOLD VR200, Инструкция по эксплуатации

Страница: 31 / 56

31
Operation
3.6 switching off the robot vacuum
If you do not want to use the Kobold VR200 robot vacuum for an extended
period of time (e.g. while on holiday), you can switch it off entirely.
To switch off the robot vacuum, proceed as follows:
• In the Settings menu, go to Switch Robot Off and confirm your selection.
The display and operating indicator turn off, and the robot vacuum is powered
down.
Note that you cannot switch off the Kobold VR200 robot vacuum while it
is being charged.
When the batteries of the robot vacuum are drained, it switches off
automatically. The robot vacuum settings may be lost in this case.
When the robot vacuum has been switched off entirely, it always has to be
docked to the base station briefly before it is operational again.
The battery charge level is checked during this time. This process can take
up to 3 minutes before the robot vacuum is operational again.
3.7 cleaning area and navigation of the robot vacuum
The robot vacuum climbs over low objects within the area to be cleaned. It recog-
nises and moves around obstacles, virtually without touching them.
3.7.1 climbing over objects with the climb assist
Notwithstanding its low structural height, the robot vacuum can easily climb
over low objects with a height up to 20 mm with its climb assist,
1 e.g. thresh-
olds or carpets.
Figure 3.18 Switching off the robot
vacuum
MAIN MENU SETTINGS
Cleaning
Schedule
Settings
Info Sound
Dustbin full detect
Set new battery
Shutdown robot
Log kopieren
1
max.
20 mm
Figure 3.19 Overcoming objects