Vorwerk KOBOLD VR200, Инструкция по эксплуатации

Страница: 14 / 56

14 For your safety
• Do not allow the robot vacuum to drive towards drop-offs when operating it with
the remote control.
• The ability of the robot vacuum to clean high pile carpet is limited. Only use the
robot vacuum on carpets with a pile height up to 20 mm. Remove carpets with a
pile height over 20 mm before cleaning or mark them off with magnetic strips. The
robot vacuum may move more slowly on carpets than on hard floor coverings.
• The Kobold VR200 robot vacuum is not approved for cleaning worktops or ceramic
glass cooktops.
• Keep breakable, light and loose objects out of range of the robot vacuum.
• Secure curtains, tablecloths and cords in the work area of the
robot vacuum.
• If the floor sensors are dirty, the robot vacuum may fall down stairs or landings.
This can cause severe damage to the device. Please clean the floor sensors regularly
as described in Sectio ”4.4 Cleaning the sensors” on page 41.
• The magnetic strip can be damaged or demagnetised by stronger external magnetic
fields. Please keep it away from such magnetic fields.
• The robot vacuum can only be charged at temperatures between 0 °C and 45 °C.
Extreme heat or cold extends the charging time and/or can cause damage to the
battery.
laser naVIgatIon sensor
The navigation sensor contains a class 1 rotating laser according to
DIN EN 60825-1.
The following rules of conduct generally apply for lasers:
• Switch off the robot vacuum prior to all changeover tasks.
• Do not aim the laser beam at other persons.
• Do not look at the direct or reflected laser beam.
Modifications (changes) or attempts to repair the device and especially the navi-
gation sensor are prohibited.