Volvo Ingersoll Rand SD-116 TF Series, Руководство оператора

Страница: 83 / 300

OPERATING INSTRUCTIONS SECTION 4
SD-116F/DX/122D/F/DX/160F/DX/190DX/200F/DX 4-19
10. Remove pin (2, Figure 4-21) and lever (1) from the jack. Install the lever as a
safety support between the frame and the operator‘s platform as shown in
(Figure 4-23).
Figure 4-23
LOWERING THE OPERATOR PLATFORM
WARNING
!
Crush area.
Stay clear when raising or lowering the operator platform.
Can cause severe injury or death.
1. Remove jack lever (1, Figure 4-21), install it in the jack, then and secure it with
the pin (2, Figure 4-21).
2. Adjust ratchet mechanism (8, Figure 4-21) to the lowering position. Move lever
(1) in the appropriate position to lower the operator platform until the bolt holes
in the ROPS support are aligned with the bolt holes in the frame. Install bolts
(1, Figure 22) in the hydraulic tank side of the frame. Item (2, Figure 4-22) acts
as a guide to align holes. Do not remove.
3. Install the two ROPS support bolts (1, Figure 4-24) on the jack side of the
ROPS support. Item (2, Figure 4-22) acts as a guide to align holes. Do not
remove.