manualshive.com logo in svg

Volvo Ingersoll Rand SD-116 TF Series, Руководство оператора

Поделиться
Скачать
Volvo Ingersoll Rand SD-116 TF Series Скачать руководство пользователя страница 59

OPERATING CONTROLS AND INSTRUMENTS

SECTION 3

SD-116F/DX/122D/F/DX/160F/DX/190DX/200F/DX

3-9

LOW OIL PRESSURE INDICATOR

The low oil pressure indicator light (27) turns on to indicate the engine has low oil pressure. 
This light also turns on when the ignition key is turned to the On position. If this indicator turns 
on during normal operation, shutdown the engine immediately and notify service personnel.

AIR FILTER RESTRICTED INDICATOR

This indicator light (28) comes on when the key is turned to the On position. The light also 
comes on to indicate that the air cleaner filter elements require service.

GRID HEATER INDICATOR (REF. ONLY)

The indicator (29) illuminates with the Ignition switch in the Run position when the engine 
temperature is below starting temperature.

WARNING

!

Do not use ether. Intake manifold glow heater starting aid has a high
temperature element. Ether may cause explosion and severe injury.

Starting aids are extremely flammable and can explode

The illuminated light indicates that the grid heater is heating the air in the engine air intake 
chamber. The indicator will go out when the air intake temperature is high enough to assist in 
starting the engine.

TURN SIGNAL INDICATORS

The turn signal indicators (30) show the direction in which the machine is going to turn on 
machines equipped with optional turn signals.

CHECK ENGINE LIGHT (AMBER)

Amber light (31) will illuminate when engine sensors detect areas of concern which should be 
investigated by the maintenance personnel

STOP ENGINE LIGHT (RED)

As stated on light (32) the operator is advised to STOP the engine as soon as possible 
following all safety precautions. An illuminated light indicates serious areas of concern.

HYDRAULIC OIL TEMPERATURE INDICATOR

This indicator (33) illuminates if the hydraulic oil temperature is too high. This light also turns 
on when the ignition key is turned to the On position If the indicator turns on during normal 
operation, shutdown the engine immediately and notify service personnel to investigate the 
cause.

Содержание Ingersoll Rand SD-116 TF Series













































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды