manualshive.com logo in svg

Volvo Ingersoll Rand SD-116 TF Series, Руководство оператора

Поделиться
Скачать
Volvo Ingersoll Rand SD-116 TF Series Скачать руководство пользователя страница 158

SECTION 5

 

MAINTENANCE INSTRUCTIONS

5-60

SD-116F/DX/122D/F/DX/160F/DX/190DX/200F/DX

1. Allow oil in axle wheel ends to reach operating temperature, position the

compactor on level ground with level plug (1, Figure 5-70) in the 6 o'clock
position (2) and shut down the engine. 

Figure 5-70

2. Place a container under the level plug (1, Figure 5-70), remove the plug and

allow oil to drain. 

3. Reposition wheel level plug (1, Figure 5-70) to the o'clock or 3 o'clock position

and fill with oil until oil is level with the bottom of the hole. Refer to Section 8 for
oil specifications.

4. Clean and replace level plug (1, Figure 5-70) and tighten.

5. Repeat procedure for the other wheel end unit.

Change Axle Differential Brake Oil

WARNING

!

Hot oil or components can burn.

Oil must be at normal operating temperatures when draining.

Avoid contact with hot oil or components.Do not allow oil to drain into the
ground.

Dispose of oil properly.

1. Position the compactor on level ground, allowing machine to run sufficiently so

axle differential / brake oil reaches operating temperature.

2. After properly positioning the machine, shut down the engine and apply brake.

3. Remove keys.

Содержание Ingersoll Rand SD-116 TF Series













































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды