Volvo Ingersoll Rand SD-116 TF Series, Руководство оператора

Страница: 30 / 300

SECTION 1 SAFETY
1-6 SD-116F/DX/122D/F/DX/160F/DX/190DX/200F/DX
ALWAYS wipe up any spilled fuel.
CHECK for WARNING tags placed on the compactor. DO NOT operate the compactor until
repairs have been made and the WARNING tags have been removed by authorized
personnel.
Check the seat belt regularly for wear or damage. Inspect belt hardware and fabric. replace if
hardware is damaged or if strap is nicked, frayed or loose stitching is found. Check that
mounting hardware is tight.
CLEAN any foreign material from the operator’s platform to reduce the danger of slipping.
KNOW the location of the Emergency Shut-Down Control if compactor is so equipped.
ALWAYS know the capabilities and limitations of your equipment-speed, gradeability,
steering, and braking.
BE AWARE of the dimensions of your compactor-height and weight-as well as your
transporter dimensions and weight.
CHECK for any conditions that could be dangerous-holes, banks, underground culverts,
manhole covers, water meter pits, curb and/or street boxes.
SAFETY INSTRUCTIONS
AVOID any operational mode that might sacrifice safety.
TAKE all necessary precautions to ensure that the machine is used only when in a safe and
reliable condition.
OPERATE the machine only if all protective and safety oriented devices, such as removable
safety devices, emergency shut off equipment, soundproofing elements and exhausts, are in
place and fully functional.
START the machine from the driver’s seat only and always wear the seat belt.
WATCH the indicators during start up and shutdown procedures in accordance with the
operating instructions.
MAKE SURE no one is at danger or risk before starting up or setting the machine in motion.
CHECK that braking, steering, signalling and lighting systems are fully functional before
starting work or travelling with the machine.
CHECK that accessories have been safely stowed away before setting the machine in motion.
OBSERVE the valid traffic regulations when traveling on public roads and ways and MAKE
SURE the machine is in a condition compatible with these regulations.
ALWAYS SWITCH ON the lighting system in conditions of poor visibility and after dark.
MAKE SURE there is sufficient clearance when crossing underpasses, bridges and tunnels or
when passing under overhead lines.
ALWAYS KEEP at a distance from the edges of building pits and slopes.
AVOID any operation that might be a risk to machine stability.
NEVER CHANGE to a lower gear on a slope; always change before reaching it. On sloping
terrain, always adapt your travelling speed to the prevailing ground conditions.