Volvo Ingersoll Rand SD-116 TF Series, Руководство оператора

Страница: 75 / 300

OPERATING INSTRUCTIONS SECTION 4
SD-116F/DX/122D/F/DX/160F/DX/190DX/200F/DX 4-11
Figure 4-13
NOTE: Braking should be smooth and capable of bringing machine to a
complete stop when propulsion control is placed in the STOP position.
10. Apply parking brake by switch (15, Figure 4-14).
Figure 4-14
11. Check for correct operation of the emergency stop. While the propulsion control
(19, Figure 4-13) is in the STOP position, depress the red emergency
STOP (20).
NOTE: The engine should immediately shut down and the parking brake apply.
After resetting the emergency brake, returning the ignition switch to the STOP
position and then turning it ON, the parking brake light will illuminate to
indicate the brakes are applied.
A restart of the machine will be required after performing the above. Also, the
emergency stop switch must be reset by pulling outward on the knob.