manualshive.com logo in svg

Volvo Ingersoll Rand SD-116 TF Series, Руководство оператора

Поделиться
Скачать
Volvo Ingersoll Rand SD-116 TF Series Скачать руководство пользователя страница 60

SECTION 3

  OPERATING CONTROLS AND INSTRUMENTS

3-10

SD-116F/DX/122D/F/DX/160F/DX/190DX/200F/DX

BATTERY MASTER SWITCH

The battery master switch (1, Figure 3-4) is connected to negative (-) cable of the batteries. 
When the switch is turned to the Off position, electrical power is disconnected from the 
machine. The switch should be turned off whenever the machine is not in use.

Figure 3-4

SUSPENSION SEAT

The compactor is equipped with a suspension seat (21, Figure 3-2) that features several 
adjustments. The armrest can be tilted by rotating adjustment (1, Figure 3-5). The back of the 
seat can be tilted by lifting adjustment handle (2) and positioning the back as desired. The 
entire seat can be rotated horizontally by lifting handle (3) and rotating seat as desired. The 
seat cushion can be positioned forward and reverse and be tilted by handles located at (4). 
Operator comfort, resistance to lowering, can be adjusted by rotating handle (5) and noting 
value on adjacent indicator wheel. The entire suspension seat assembly and attached control 
console can be positioned forward or reverse by lifting handle (6) and positioning as required. 

Figure 3-5

Содержание Ingersoll Rand SD-116 TF Series













































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды