Volvo Ingersoll Rand SD-116 TF Series, Руководство оператора

Страница: 108 / 300

SECTION 5 MAINTENANCE INSTRUCTIONS
5-10 SD-116F/DX/122D/F/DX/160F/DX/190DX/200F/DX
Figure 5-3
5. Slowly push the handle (3, Figure 5-2) toward you until the hood is down.
6. Pull up the two draw latches (2, Figure 5-1) on both sides of the machine.
7. Put a lock (1, Figure 5-1) on one of the draw latches and lock.
NOTICE
Keep the hood locked at all times, except to access the engine.
ROUTINE MAINTENANCE - AS REQUIRED
Check Air Cleaner Connections and Ducts For Leaks
Ensure that all connections between the air cleaner and the engine are tight and sealed.
Checking and Removing the Air Cleaner Primary Element
Maintenance of the air cleaner is due only when the air cleaner restriction indicator light
(located on the operator's console) is illuminated. This indicates that the air cleaner is plugged
and requires attention.
The air cleaner is a dry type with two elements. A primary element, that is replaceable or can
be cleaned, and a safety element that should only be replaced and never cleaned. The safety
element should be replaced after every third primary element cleaning or change.
NOTE: Dust that gets by the air cleaner system can often be detected by
looking for dust streaks on the air transfer tubing or just inside the intake
manifold inlet.