Volvo Ingersoll Rand SD-116 TF Series, Руководство оператора

Страница: 112 / 300

SECTION 5 MAINTENANCE INSTRUCTIONS
5-14 SD-116F/DX/122D/F/DX/160F/DX/190DX/200F/DX
Figure 5-8
• Swish the primary filter element around in the solution to loosen dirt particles and
put them into suspension in the solution.
• Rinse the primary filter element from the “clean” side to the “dirty” side with a
gentle stream of water. Rinse from both sides if necessary.
• Dry the primary filter element before reusing. Circulate warm air at LESS than
71 ° C (160 ° F). DO NOT USE A LIGHT BULB TO DRY THE PRIMARY FILTER
ELEMENT.
• Inspect for holes and tears by looking through the primary filter element toward a
bright light. Check for damaged gaskets or dented metal parts. DO NOT REUSE
DAMAGED FILTER ELEMENTS.
• Protect the filter from dust/damage while drying.
Replacing the Air Cleaner Elements
1. Examine the new or cleaned primary air cleaner element (1, Figure 5-9) for torn
or damaged pleats, liners or gaskets or bent end covers. Discard if damaged
and replace.
Figure 5-9