manualshive.com logo in svg

Volvo Ingersoll Rand SD-116 TF Series, Руководство оператора

Поделиться
Скачать
Volvo Ingersoll Rand SD-116 TF Series Скачать руководство пользователя страница 26

SECTION 1

SAFETY

1-2

SD-116F/DX/122D/F/DX/160F/DX/190DX/200F/DX

SAFETY

BE AWARE OF SAFETY INFORMATION

This is the Safety Alert Symbol. It is used to alert you to potential personal injury hazards. Obey 
all safety messages that follow this symbol to avoid possible injury or death.

Follow recommended precautions and safe operating practices.

UNDERSTAND SIGNAL WORDS

A signal word - DANGER, WARNING, or CAUTION - is used with the safety-alert symbol. 
DANGER identifies the most serious hazard.

DANGER, WARNING, or CAUTION safety labels are located near specific hazards.

NOTICE labels are for general information.

SAFETY ALERT SYMBOL

DANGER

!

RED BACKGROUND

DANGER indicates an imminently hazardous situation which if not
avoided, will result in death or serious injury.

WARNING

!

ORANGE BACKGROUND

WARNING indicates a POTENTIALLY hazardous situation which if not
avoided, COULD result in death or serious injury.

Содержание Ingersoll Rand SD-116 TF Series













































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды