Volvo Ingersoll Rand SD-116 TF Series, Руководство оператора

Страница: 28 / 300

SECTION 1 SAFETY
1-4 SD-116F/DX/122D/F/DX/160F/DX/190DX/200F/DX
GENERAL
Ingersoll Rand cannot ensure for all possible circumstances that might lead up to a potential
hazard. Therefore, the combination of warnings listed in this manual and those placed on the
machine itself are not intended to be all inclusive.
Operators and maintenance personnel must be alert to recognize and avoid potential hazards.
They should also have comprehensive training, required skills and necessary tools to properly
perform their functions.
The machine was built in accordance with state-of-the-art standards and recognized safety
rules. Nevertheless, its misuse may constitute a risk to life and limb of the user or of third
parties, and may cause damage to the machine or other material property.
The machine must be used in accordance with its designated use as described in the
operating manual. The machine must only be operated by safety-conscious persons who are
fully aware of the risks involved in operating the machine. Any functional disorders, especially
those affecting the safety of the machine, must be corrected immediately.
The machine is designed exclusively for the compaction of soil. Use of the machine for
purposes other than that mentioned (such as for towing other vehicles/equipment) is
considered contrary to its designated use. The manufacturer/supplier cannot be held liable for
any damage resulting from such use. The risk of such misuse lies entirely with the user.
Operating the machine within the limits of its designated use also involves compliance with the
inspection and maintenance directives contained in the operating manual.
SELECTION AND QUALIFICATION OF PERSONNEL
Work on and with the machine must be performed by qualified personnel only. Statutory
minimum age limits must be observed.
Individual responsibilities of the personnel responsible for operation, setup, maintenance and
repair of the machine should be stated clearly.
Define the machine operator’s responsibilities - also with regard to observing traffic regulations
- the operator should have the authority to refuse instructions by third parties that are contrary
to safety.
Do not allow persons being trained or instructed in the operation or maintenance of the
machine to work without permanent supervision by an experienced person.
Work on the electrical system and equipment of the machine must be done only by a skilled
electrician or by instructed persons under the supervision and guidance of a skilled electrician
and must be in accordance with electrical engineering rules and regulations.
Work on the chassis, brake, hydraulic and steering systems must be performed by skilled
personnel with special knowledge and training for such work.