manualshive.com logo in svg

Volvo D11 series, Руководство по установке


Поделиться
Скачать
background image

Safety precautions

4

  Always wear protective goggles if there is a risk 

of splinters, grinding sparks and splashes from 

acid or other chemicals. Your eyes are extreme-

ly sensitive and an injury to them can result in 

loss of sight!

  Avoid skin contact with oil! Long term or re-

peated skin contact with oil can lead to the loss 

of natural oils from the skin. This leads to irrita-

tion, dry skin, eczema and other skin problems. 

Old oil is more dangerous to your health than 

new. Use protective gloves and avoid oil-soaked 

clothes and rags. Wash regularly, especially 

before meals. Use special skin creams to help 

clean and to stop your skin drying out.

  Most chemicals intended for the product (en-

gine and reverse gear oils, glycol, gasoline and 

diesel), or chemicals intended for the workshop 

(degreasing agent, paints and solvents) are 

harmful to your health. Read the instructions 

on the packaging carefully! Always follow pro-

tective measures (using a protective mask, 

goggles, gloves etc.). Make sure that other per-

sonnel are not unknowingly exposed to harm-

ful substances, in the air that they breathe for 

example. Ensure that ventilation is good. Deal 

with used and excess chemicals as directed.

  Be extremely careful when tracing leaks in the 

fuel system and when testing injectors. Wear 

protective goggles. The jet from an injector is 

under very high pressure and fuel can pen-

etrate deep into tissue, causing serious injury 

with a risk of blood poisoning.

  All fuels and many chemicals are inflamma-

ble. Keep away from naked flames or sparks. 

Gasoline, some solvents and hydrogen from 

batteries in the correct proportions with air 

are very inflammable and explosive. Do not 

smoke! Maintain good ventilation and take the 

necessary safety measures before welding or 

grinding in the vicinity. Always keep a fire extin-

guisher accessible in the workplace.

  Store oil and fuel-soaked rags and old fuel and 

oil filters properly. Oil-soaked rags can, in cer-

tain circumstances, ignite spontaneously. Old 

fuel and oil filters are environmentally harmful 

and should be delivered, with used lubrication 

oil, contaminated fuel, paint, solvents and de-

greasing agents, to a proper refuse station for 

environmentally harmful material for destruc-

tion.

  Ensure that the battery compartment is de-

signed according to current safety standards. 
Never allow an open flame or electric sparks 
near the battery area. Never smoke in proximity 
to the batteries. The batteries give off hydrogen 
gas during charging which when mixed with air 
can form an explosive gas. This gas is easily ig-
nited and highly volatile. Incorrect connection of 
the battery can cause sparks sufficient to cause 
an explosion with resulting damage. Do not shift 
the connections when attempting to start the 
engine (spark risk) and do not lean over any of 
the batteries. 

 

  Always ensure that the Plus (positive) and 

Minus (negative) battery leads are correctly 
installed on the corresponding terminal posts 
on the battery. Incorrect installation can result 
in serious damage to the electrical equipment. 
Refer to the wiring diagrams.

  Always use protective goggles when charging 

and handling the batteries. The battery electro-
lyte contains extremely corrosive sulphuric acid. 
If this should come in contact with the skin, im-
mediately wash with soap and plenty of water. 
If battery acid comes in contact with the eyes, 
flush immediately with water and obtain medi-
cal assistance.

  Turn the engine off and turn off the power at the 

main switches (breakers) before carrying out 
work on the electrical system.

  Clutch adjustments must be carried out with the 

engine turned off.

  Use the lifting eyes fitted on the engine/reverse 

gear when lifting the drive unit. Always check 
that the lifting equipment used is in good condi-
tion and has the load capacity to lift the engine 
(engine weight including reverse gear and any 
extra equipment installed).

 

To ensure safe lifting and avoid damage to 
components installed on the top of the engine 
use an adjustable lifting beam. All chains and 
cables must run parallel to each other and as 
perpendicular as possible to the upper side of 
the engine.

 

If extra equipment is installed on the engine 
which alters its centre of gravity a special lifting 
device is required to obtain the correct balance 
for safe handling.

 

Never carry out work on an engine suspended 
on a hoist.

Содержание D11 series





















































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для D11 series

Quectel M10 Hardware Description preview
M10
Бренд: Quectel Страницы: 71
O.S. engine Max-BGX-1 Ring Instructions preview
Max-BGX-1 Ring
Бренд: O.S. engine Страницы: 5
O.S. engine MAX-15CV-R Series Owner'S Instruction Manual preview
MAX-15CV-R Series
Бренд: O.S. engine Страницы: 19
GAPOSA QCF4 Manual preview
QCF4
Бренд: GAPOSA Страницы: 20
Daedong 3C093 Operator'S Manual preview
3C093
Бренд: Daedong Страницы: 51
Nice Neomat A Series Instructions And Warnings For The Fitter preview
Neomat A Series
Бренд: Nice Страницы: 52
RCGF 50CC-Twin Operator'S Manual preview
50CC-Twin
Бренд: RCGF Страницы: 22
jiangdong JF120 Owner'S Manual preview
JF120
Бренд: jiangdong Страницы: 27
Perkins 403F-E17T 404F-E22T Operation And Maintenance Manual preview
403F-E17T 404F-E22T
Бренд: Perkins Страницы: 108
Guangxi Liuzhou Wuling Motors LJ465Q-1ANE1 Instruction Book preview
LJ465Q-1ANE1
Бренд: Guangxi Liuzhou Wuling Motors Страницы: 54
Hatz 2-4L41C Manual preview
2-4L41C
Бренд: Hatz Страницы: 112
Fagor SPM Manual preview
SPM
Бренд: Fagor Страницы: 86
V.P.S. 160F Owner'S Manual preview
160F
Бренд: V.P.S. Страницы: 25
YS FZ63 Operator'S Manual preview
FZ63
Бренд: YS Страницы: 2
MVVS 116-BOXER IRS - V1.7 Operating Instructions Manual preview
116-BOXER IRS - V1.7
Бренд: MVVS Страницы: 6
LinMot PS01-37x120F-HP-SSC-R/ FC Installation Manual preview
PS01-37x120F-HP-SSC-R/ FC
Бренд: LinMot Страницы: 40
Faulhaber 2232***BX4 series Instruction Manual preview
2232***BX4 series
Бренд: Faulhaber Страницы: 60
Xtreme Power 62027 Owner'S Manual preview
62027
Бренд: Xtreme Power Страницы: 42

Бренды по названию

Популярные бренды

Загрузить еще бренды