Volpi Tecno Energia PAGURO 8500, Руководство пользователя и по обслуживанию

Страница: 62 / 84

10 MAINTENANCE
Mod. PAGURO
6000/9000/14000/18000/6500/8500
Date: 12.03.2020_Rev: 0.0
5
OPERATIONS TO BE CARRIED OUT DAILY OR EVERY 10 HOURS

Check the engine oil level. If the level does not exceed the minimum level, top up;

Check the coolant level. If the level is below the mark, it must be topped up;

Check the integrity of the fuel system and that there are no drips.

Check that there is no water or dirt in the fuel. If not, replace the fuel/water separator filter;

Check that there are no leaks;

Check the exhaust system for leaks around the terminal, seals and welds;

Check the integrity of the exhaust system insulation. Replace if damaged.
OPERATIONS TO BE CARRIED OUT WEEKLY

Check the condition of the batteries and ensure that the connections are secure;

Clean any corrosion on the batteries;

Perform a thorough cleaning of the generator. A dirty, oil-filled surface prevents the generator from
cooling.
OPERATIONS TO BE PERFORMED EVERY 250 HOURS

Squeeze the cooling system hoses to assess wear. Replace them if worn;

Replace the oil filter with the original one. Dispose of it in the designated collection centres;

Replace the fuel filter with the original and bleed the fuel system. Dispose of the filter in the designated
collection centres.

Replace the excitation capacitors with original ones. Dispose of it in the designated collection centres;

Check the starter solenoid for corrosion. If necessary, lubricate.

Check the plug of the zinc anode for worn. If necessary, replace with the original.

Verify the worn of the sea water pump impeller. If necessary, replace with the original.
IMPORTANT! It is recommended to always carry a spare kit consisting of impeller and impeller
seal.
Impeller and seal