Volpi Tecno Energia PAGURO 8500, Руководство пользователя и по обслуживанию

Страница: 29 / 84

4 TRANSPORT AND HANDLING
Mod. PAGURO
6000/9000/14000/18000/6500/8500
Date: 12.03.2020_Rev: 0.0
4
4.2.2 Lifting and handling with forklift
This type of handling is used to move the packed generator.
WARNING! Always check where the forks rest under the box.
To lift with a forklift, follow these steps:
a) Insert the fork of the truck under the wooden box, taking care that they protrude from the opposite
side.
b) Lift the generator slightly and make sure that the load is in balance.
c) Lift the generator to the minimum and move it away without jolts or shocks.
d) Place the box at the designated location.
e) Remove the forks from under the box.
Fork insertion Fork insertion
WARNING!
- Unloading, lifting and handling operations must be carried out by qualified personnel specially
prepared for these operations.
- Prevent multiple people from working on the generator at the same time without coordination,
resulting in a hazardous situation
.
- Make sure the dimensions, weight and centre of gravity of the generator and its packaging.
The packaging must be lifted with a forklift truck that has the capacity and length of the forks
appropriate to the nature of the load to be handled.
During the use of the forklift truck the operator must also:
- check that the packaging is balanced.
- lift the packaging far enough to move it.
WARNING! During the transport, protect the packaging from overturning.
WARNING! In any case the packaging must never be transported, stocked or stationed in an oblique
position.