Pro
te
c
t
ed
b
y
co
p
y
rig
h
t.
C
o
p
y
in
g
fo
r
pr
iv
a
t
e
o
r
c
o
m
m
e
r
c
ia
l
p
u
rp
o
s
e
s
,
i
n
p
a
rt
o
r i
n
w
h
o
le
,
is
n
o
t
p
e
r
m
it
t
e
d
u
n
l
e
s
s
a
ut
ho
r
i
s
ed
b
y
V
olk
sw
a
ge
n AG
.
V
olk
s
w
a
g
en
AG do
es
n
ot g
uar
ante
e
or a
c
c
ep
t
a
ny
li
a
b
i
li
t
y
w
ith
r
e
s
p
e
c
t
t
o
th
e
c
o
rr
e
c
t
n
e
s
s
o
f
in
fo
r
m
a
tio
n
in
th
is
d
o
c
um
en
t.
C
o
py
rig
ht b
y
V
olk
sw
a
ge
n
A
G.
♦ Torque wrench - V.A.G 1332-
♦ Socket drive with 8 mm hexagon socket or TORX T50
Removing
– Remove alternator
⇒ page 10
.
– Clamp alternator in a vice at securing points.
– Remove protective cap (where there is one) from poly V-belt
pulley with freewheel.
– Insert multipoint adapter - T10474- -1- into poly V-belt pulley
and fit an open-end spanner (width across flats 17 mm) to it.
– Insert hexagon socket or TORX socket -2- into alternator shaft.
– Turn generator shaft clockwise (left-handed thread) to loosen
it, counterholding it with the open-end spanner.
– Hold poly V-belt pulley with freewheel stationary with your
hand and turn alternator shaft until poly V-belt pulley with free‐
wheel can be removed.
Installing
Install in the reverse order of removal observing the following:
The torque wrench - V.A.G 1332- must be modified for assembly
of poly V-belt with freewheel as follows:
– Release socket drive -1- and pull off grip -2-.
– Turn torque wrench grip -2- 180° and reinsert socket drive.
– Set turning direction of torque wrench to anti-clockwise at
socket drive.
– First screw poly V-belt pulley with freewheel onto alternator
shaft by hand as far as possible.
– Insert multipoint adapter - T10474- -1- into poly V-belt pulley
and fit an open-end spanner (width across flats 17 mm) to it.
up! 2012 ➤
Electrical system - Edition 03.2017
18
Rep. gr.27 - Starter, current supply, CCS
