manualshive.com logo in svg

Vivax Metrotech vLoc3 RTK-Pro, Руководство пользователя

Поделиться
Скачать
Vivax Metrotech vLoc3 RTK-Pro Скачать руководство пользователя страница 48

™

Page 40 of 67

4     Data Logging

4.2.2.3  Locator Firmware update

Each time a locator is connected to the PC, it’s firmware version is checked against the latest version available on the Vivax-
Metrotech server and the user is notified if an update is available as shown below. This feature will only be available if the 
computer is “online”.
Clicking on the Update Now button will fetch the latest version from the server and then download it to the locator.
The “Update From Disc” feature will only be available if a suitable dongle is also attached to the PC. This feature allows the user 
to install older versions of firmware stored on the computer, although it is advised that only the latest version of firmware is used. 

4.2.3 Toolbar

The vLoc3 RTK-Pro locator can be configured so that features can be switched on or off. This enables the user to tailor the 
instrument to meet the needs of their application while keeping the user interface uncluttered. The toolbar at the top of the 
screen enables the user to create configurations.

The application toolbar looks like this: 

New.vmcfg MyLocator3

This will open an existing configuration file (*.vmcfg).

This will save the configuration to a file.

This will write the configuration to the connected locator.

This will read the configuration from the connected locator.

This will display information about MyLocator3.

Содержание vLoc3 RTK-Pro















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды