™
Page 22 of 67
2 vLoc3 RTK-Pro Receiver
The color of the confidence circle also changes depending on the degree of confidence:
Green: - low distortion/high confidence.
Blue: - Minor distortion/medium confidence, proceed with care.
Red: - Excessive distortion/low confidence, treat all data and measurements with caution.
7. Notice that vertical and horizontal distances from the target line are displayed.
1.43m
1.86m
This must not be mistaken for the distance diagonally to the target; this information is not displayed. The vertical distance is the
true depth from the bottom of the locator. The advantage of this is that the depth and position of the target can be determined
without being directly over the target line. So, in the event of an obstruction at the measuring point, data can still be gathered by
placing the locator on one side of the target.
Plan View Screen
The plan view screen shows a picture as if you were viewing the line from above ground. When the red line is in the center and
pointing forward/backward, then you are directly over the line and pointing in the direction of the line.
14’5’’
4
3
2
1
12.9mA
32.8kHz
4
G
5
14’5’’
12.9mA
32.8kHz
4
G
1
Depth and current readings
2
Frequency selected
3
Target line
4
Lines of confidence (closer these are to the target line indicates more confidence)
5
Arrow indicates the direction to move towards the line. It only shows when the distance to the target line is far away.
Using the Plan View screen.
1. Apply the signal to the target line in the usual way and select the plan view screen by using long presses on the return
button until the desired screen appears.
2. Position the locator within the approximate position of the target line. Use the plan view to help guide you toward the target
line. You can imagine that the plan view is giving you a view into the ground.
3. Position yourself so that the target line is pointing forward/back and is centralized on the screen.
0.18m
3.59mA
32.8kHz
4G
