manualshive.com logo in svg

Vivax Metrotech vLoc3 RTK-Pro, Руководство пользователя

Поделиться
Скачать
Vivax Metrotech vLoc3 RTK-Pro Скачать руководство пользователя страница 44

™

Page 36 of 67

4     Data Logging

4.  Data Logging

The vLoc3 RTK-Pro has an internal memory that can be used to store locator data. (Or if activated, can be sent to the “cloud”) 
Available storage size is four Gigabyte which relates to many thousands of records.
The records are user-initiated. These are records stored by the user whenever the “+” button is pressed when in the “Information” 
screen.
Data can be stored relating to a standard locate or relating to any of the receiver accessories. (apart from the Remote antenna 
accessory).
In addition to this, every time a self-test routine is run the results are also recorded in the equipment. This is not a user-initiated 
record; it is done automatically after every self-test.
Warnings/Alarms are also automatically recorded.

To store a record first locate a point of interest. When taking readings that are recorded in the log or sent to the cloud, there 
is an extra action to be taken. The locator can provide cm mapping accuracy. For technical reasons the GNSS antenna is 
positioned slightly ahead of the locator. This displacement is compensated for by tilting the locator backward until the antennas 
are vertically aligned. 

Antenna Displacement

GNSS Antenna

Procedure to log a point

Locate the line in the usual way (See vLoc3-Pro User manual)
Press the Info key. The following screen should be shown:

4G

Log

27

0.72m

43.0mA

50°42′59.90570′′N

3°26′35.54358′′W

43.0mA

27.50m

 0′1′′ (2DRMS)

Press the “+” key to log the data. The log number will increment indicating that the log is stored but then a new screen will be 
shown as below. 

Содержание vLoc3 RTK-Pro















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды