manualshive.com logo in svg

Vivax Metrotech vLoc3 RTK-Pro, Руководство пользователя

Поделиться
Скачать
Vivax Metrotech vLoc3 RTK-Pro Скачать руководство пользователя страница 14

™

Page 6 of 67

2     vLoc3 RTK-Pro Receiver

Where the 

  icon is not shown, the enter button is used to scroll through the options of that feature.

Use the “+” and “- “buttons to scroll up and down through the menu.

The features are described below:

2.4.1 About

This section holds the data about the locator, such as software revision, calibration data etc.

2.4.2  Speaker Volume

Press the enter button to scroll through the speaker volume settings.

2.4.3  Sound Configuration

Allows configuration of sounds generated in locate modes

 

●

Active mode: 

 

ο Frequency Modulated (FM) Sound pitch changes with signal strength

 

ο Amplitude Modulated (AM) Sound volume changes with signal strength

 

●

Radio mode: FM or Real (Sound derived directly from the received signal)

 

●

Power mode: FM or Real

2.4.4 Backlight

Press the enter button to change the backlight intensity setting. Note that a high backlight setting will affect battery life. Or select 
“Auto,” which automatically sets backlight depending on ambient light levels.

2.4.5 Frequency

Use the enter key to enter the Frequency sub-menu. Scroll up and down the table using the “+” and “-” keys. The table contains 
all available frequency options. To simplify the operation of the unit, select only the frequencies applicable to your application. To 
do this, use the enter key to check the boxes on the right. Frequencies not checked will not appear on the locate screen.

Frequency

1.45kHz
2.0kHz
8.01kHz
8.19kHz
8KFF
8.44kHz
9.5kHz

9.8kHz

Note also that certain frequency options have an A-frame icon next to them. This indicates that these frequencies are selected to 
be used with the fault find A-frame. 

2.4.6  Classic Locate

This option Cloud-based if the User menu is entered from the Classic Screen.
Use the enter key to reveal the list of options relating to the Classic Locate modes. Options are:

Classic Locate

Peak

Null

Peak Arrows

Broad

Delta Null

Omni Directional Peak

Omni Directional Peak

Содержание vLoc3 RTK-Pro















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды