manualshive.com logo in svg

Vivax Metrotech vLoc3 RTK-Pro, Руководство пользователя

Поделиться
Скачать
Vivax Metrotech vLoc3 RTK-Pro Скачать руководство пользователя страница 21

™

Page 13 of 67

2     vLoc3 RTK-Pro Receiver

Scroll to the source you wish to use and press the enter key to select. “RTCM status” will show “Waiting,” then “Connecting,” 
then “Requesting RTCM” then “Receiving RTCM” as the vLoc3-RTK receives RTCM from the NTRIP caster. In this case the “RTK 
source” shows the selected RTK source “RTK_MSM5”.

GPS RTK Source

RTK_MSM5
Receiving RTCM
74
50

36

48.4001

N

3

24

36.1962

W

11.71km
10s

Get RTK sources

RTK source
RTCM status
RTCM count
RTK ref. latitude
RTK ref. longitude
RTK ref. distance
RTK ref. age 

Every 30 seconds the “RTCM status” will show “Sending GGA” as the vLoc3-RTK sends it’s GPS position to the NTRIP caster in 
an NMEA0183 GGA message if applicable.

“RTCM count”

 shows an incrementing count of RTCM packets successfully received from the NTRIP caster.

“RTK ref. latitude/longitude”

 shows the GPS position of the RTK base station received from the NTRIP caster.

“RTK ref. distance”

 shows the distance between the vLoc3-RTK GPS position and the RTK base station GPS position (the 

larger this is the greater GPS positional errors will be).

“RTK ref. age”

 shows how old the last RTK base station position received from the NTRIP caster is, this should be updated 

every 10 seconds with a good data connection.

Cloud (VMMap) based data logging

To use the VMMap data logging facility an account needs to be set up and each locator needs to be registered with the Vivax-
Metrotech VMMAP mapping application. For further information on this contact Vivax-Metrotech Corp. This User Guide assumes 
the locator is registered and the operator has an active account.

When registered the locator will send updates to VMMap whenever the user logs data as long as there is data cellular 
connection. You can check the data connectivity on the status bar. 
If there is only signal strength bars without any letters, there is no data connection ie:

G

E

3G

H

4G

It is possible to check the status of the data log by entering the User set-up by using a long press on the Information key.
viding there is cellular data connectivity, the screen below should be available from the Menu.

Cloud

Cloud Status No Network

>
>
>
>
>

AT+CFUN=1
+CIEV:2,1
+CGREG:0
+CEREG:4

Содержание vLoc3 RTK-Pro















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды