ENVI Series: VTC-IR302FN
27
For setting up other fields on the setup window, refer to
Section 0
Manual Network Setup
on
page 22
. After filling the fields with appropriate values, click
Set
button to apply the changed
values to IP device. If you don’t want it, click
Cancel
button to restore the previous values.
9.5.
Using PPPoE
If your network environment is based on PPPoE connection, you’ll need to choose
PPPoE
on IP
Type selection. First open the Network Setup window either by
Manual IP Setup
or
Automatic
IP Setup
procedure. Choose
PPPoE
in IP Type selection, and then all the fields in
Network
setup area on the window will be disabled. The network settings such as IP Address, Netmask,
Default Gateway and DNS are no longer available to enter. You only need to enter the Server
Name, HTTP Port number, and login authentication for your PPPoE connection.
Содержание VTC-402NZ
