ENVI Series: VTC-IR302FN
35
10.2.
Admin Menu Structure
The following table shows the hierarchy of the Admin menu structure that we’re going to deal with
in this manual.
11.
Quick Configuration
In Quick Configuration, you will be able to set up many of the essential parts of the configuration
in a simple manner without going into details. Selecting Quick Configuration gives you the menu as
seen below. You can perform each setup by clicking the one you would like to configure.
11.1.
Step 1: Changing Server Name
Click Server Name on System Configuration menu, then Server Name Setup windows will be
displayed. Refer to
Section 12.1 Server Name Setup on page 36
to see how to change the
server name.
11.2.
Step 2: Time Setup
Click Date & Time on System Configuration menu, then the Local Date & Time Configuration
window will be displayed. Refer to
Section 12.2 Date & Time on page 37
to see how to set up.
11.3.
Step 3: Network Setup
To make a connection to the Internet, it is required to figure out the type of the Internet service
you’re using. Refer to
Section 13.
Network Configuration
on page 40
to see how to set up.
Содержание VTC-402NZ
