Vitek VTC-402NZ, Руководство пользователя

Страница: 178 / 193

ENVI Series: VTC-IR302FN
177
The below image is where you adjust the recording parameters.
Item Description
A,B,C,D Camera Selection Select one or more cameras by clicking buttons.
E Unselect All Clear the device list which shows the selected cameras.
F Condition List Define the condition for recording to be started.
G Condition to use Decide whether to use the defined condition or not.
H Condition Mode Select the condition mode for recording.
I Scheduling Set up the schedule for recording.
J Event setup Set up the event to initiate recording.
K Apply to Condition Apply the configured schedule and event data to condition list.
L Apply to Camera Apply the condition to camera.
M
Enable Recording
Service
Enable this to activate the recording. When this is not enabled, it
won’t be saved if a recording condition is set.