ENVI Series: VTC-IR302FN
36
11.4.
Step 4: IPCCTVDNS.COM
When VITEK Server is used in a Dynamic IP environment, it is required to utilize
IPCCTVDNS.com
feature. Refer to
Section 35.
IP-CCTV DNS Registration
on page 161
for
setup information.
11.5.
Step 5: Recording Configuration
Vitek cameras with MicroSD card can be configured for recording options in this section. Refer to
Section 16.1
SD / MicroSD Card Configuration
on page 89
to see how to set up.
11.6.
Finish
After clicking Finish all changes will be saved automatically to the camera/server
12.
System Configuration Menu
When you click on
System Configuration
item on Admin Menu, the following sub menu will be
displayed.
12.1.
Server Name Setup
Click
Step 1
on
Quick Configuration
or
Server Name
under
System Configuration
then the
following will be displayed and you will find out the system information such as model number of
the VITEK camera, server name (camera name), MAC address (serial number), firmware version,
and Web image version.
Содержание VTC-402NZ
