ENVI Series: VTC-IR302FN
25
Server Name
Name of the selected IP device.
HTTP Port
HTTP port number of the IP device for web access to homepage.
IP Type
How to assign IP address to the device (Select
Static
here for Manual IP Setup)
Network
General network parameters are required in this part. Please contact your network
administrator for detail. (
IP Address, Netmask, Default Gateway, DNS1, DNS2
)
Authentication
(Admin Password)
Password for the IP device. (Default password for Vitek products is “
root”
)
Save Configuration
Option
Select whether the configured contents is to be saved in the Camera memory or not.
Save Configuration
: Changed values will be saved in the Camera memory of the
device, which means the changes are permanent.
Not Saving
: Changed values will not be saved in the Camera memory, which
means if the IP device is turned off the changes are lost and the previous setting
will be applied back.
Click
Set
button to apply the changed values to IP device. If you don’t want it, click
Cancel
button
to restore the previous values.
Содержание VTC-402NZ
