VITEK 5-in-1 CCTV TESTING MONITOR
VITEK 5-in-1 CCTV TESTING MONITOR
Page 13
.
Local IP
:
:
Tester’s IP Address - Tester can auto-modify the tester’s IP to the same network segment
with the scanned camera’s IP
Discovery IP
:
:
Connected tester equipment’s IP Address - If the camera is connected to the tester
directly, the tester will display the camera’s IP address. If tester connects to Local Area Network, it
displays the current IP address.
Start:
PING function, click “Start”, can PING camera’s IP
Rapid ONVIF:
Rapid ONVIF Quick link
IPC TEST:
IPC TEST Quick link
Applicability
:
:
Using the IP Discovery App, you do not need to know the first two digits of the
camera’s IP address, it can auto-scan the whole network segment IP, and auto-modify tester’s IP
address, greatly improving engineering efficiency
.
3.3.5 Rapid ONVIF test
Rapid ONVIF can display 4K H.265/H.264 camera image by tester mainstream,
Press to enter ONVIF function, the meter auto scans all ONVIF cameras in different network
segments. It lists cameras name and IP address on the Left of screen. The tester can auto log into
camera and display camera image. From factory default use admin password to auto login, if you
modified the password, then use the modified password to login
If you select ONVIF Rapid mode, the meter automatically scans different network segments for ONVIF
Page 14
cameras. It lists the camera name and IP address on the Device List. The tester can auto login camera
and display the camera’s image.
Click the button “Refresh”, and the tester will scan the ONVIF camera again. Click the newly displayed
ONVIF camera on the “Device List”. The tester will show the IP camera’s relative information and
settings. When you see the “activate success” prompt, click login to display camera image.
The pop-up settings menu will appear when you click the “ONVIF setting” icon in the lower left corner