VITEK 5-in-1 CCTV TESTING MONITOR
Page 43
（
（
4
）
）
Port Flashing
Connect a network cable to the switch “LAN” port, click the icon to open the Port Flashing
app. Click “Start”. The IP tester sends a unique signal to make the connected LAN port of the switch
flash.
If the tester and PoE switch are connected properly, the LAN port of POE switch flashes at a special
frequency, if not, test different LAN port
Application:
The tester will send special signals to make the connected LAN port flicker at a special frequency, which
will enable the installers to easily and quickly find the connected Ethernet cable. This function can prevent
mistaken insertion or disconnection of non-corresponding cables to artificially interrupt network
connection.
