VITEK 5-in-1 CCTV TESTING MONITOR
VITEK 5-in-1 CCTV TESTING MONITOR
Page 31
(1) PTZ control
1.1 Coaxial PTZ control
Click the icon “PTZ” on the right toolbar for the corresponding settings.
“Port”: select coaxial control
Enter PTZ address to perform parameters setting.
Page 32
For operation instructions, please refer to “3.3.9 PTZ (1) Video monitor test”.
The PTZ address in the tester must be consistent with the dome camera or decoder, then the IPC
tester can test after setting the parameter. The tester can control the PTZ and lens.
To control PTZ by screen touch:
Tap left, right, upward, and downward on the touch screen to control the PTZ rotation direction. PTZ
cameras will rotate accordingly. With two fingers, move outward and inward on the touch screen to zoom
in and out the PTZ.
Set preset position:
Move the PTZ camera to the preset position, the Tap it and input preset position number. Tap “Set
position” to complete set preset position.
