VITEK 5-in-1 CCTV TESTING MONITOR
VITEK 5-in-1 CCTV TESTING MONITOR
Page 1
Thank you for purchasing this IP camera tester. Please read this manual before using the IP camera
tester to ensure proper use. Before using the IP camera tester, please carefully read the Safety
Information in this manual. This manual should be retained for reference. Keep the S/N label for
after-sale service within the 3-year warranty period. Repair service will be charged for products
without S/N labels. If there are any questions or problems while using this IP camera tester, or you
find the product to be damaged, please contact our Technical Support Department.
1. Safety information
◆
The tester is intended for use in compliance with local rules of electrical usage and avoid places
which are inapplicable for the use of electronics of this nature, such as hospitals, gas stations etc.
◆
To prevent damage to the unit, keep away from all moisture.
◆
During transportation and use, it is highly recommended to avoid shock and vibration of the tester.
◆
Do not leave the tester alone while charging. If the battery is found severely hot, the tester should be
powered off from the power source at once. The tester should not be charged over 8 hours.
◆
The tester should not be used in an environment with flammable gas.
◆
Do not disassemble the tester. There are no user serviceable parts inside.
◆
The instrument should not be used in environments with strong electromagnetic interference.
◆
Do not touch the tester with wet hands.
◆
Do not use detergent to clean the tester. If dirt is not easy to remove, use a soft damp cloth.
Page 2
2. IP Camera Tester Introduction
2.1 General
The 4-inch IPS touch screen IP camera monitor is designed for maintenance and installation of IP
cameras, analog cameras, TVI, CVI AHD cameras, as well as testing 4K H.264 /4K H.265 cameras by
mainstream. The 800 x 480 resolution enables it to display network HD cameras and analog cameras in
high resolution. This unit supports many ONVIF PTZ models, and analog PTZ control. The
combination of touch screen and key buttons make this IP camera tester highly user- friendly.
The tester is also a great tool for Ethernet network testing. Other functions include providing 25.5W
PoE power to a camera, PING and IP address searching, LED Flashlight, DC 12V 3A power output and
much more. Its portability, user-friendly design and other functions make the IP tester an essential tool
for all installers or technicians.
2.2 Packing list
1) Tester
2) Adaptor DC12V 1A
3) Polymer lithium ion battery (7.4V DC 2400mAh)
4) BNC cable
5) RS485 cable
6) Output Power cable
7) Audio cable
8) Wrist belt
9) Tool bag
