SPIRIT G XL 1-3 KVA - PF0.9 - UPS
www.visionups.com
9
⑤
Repeat the steps ③ and ④ to assemble the other rails.
⑥
Tighten the four butterfly nuts in the middle of each rail assembly.
⑦
If installing optional modules, then repeat step ① through step ⑥ for each rail kit.
⑧
Place the UPS on a flat, stable surface with the front of the device facing to you.
⑨
Align the mounting brackets with the screw holes on each side of the UPS and fix it all with the
supplied M4x8 flat-head screws (see fig. 5).
⑩
If installing optional modules, repeat step ⑧ and ⑨ for each module.
⑪
Slide the UPS and any other optional module into the rack.
⑫
Secure the front of the UPS to the rack by using one M5x12 pan-head screws and one M5 cage nuts
on each side (see fig. 6). Install the bottom screw on each side through the bottom hole of mounting
bracket and the bottom hole of the rail. Repeat that for any optional module.
⑬
Continue to the following section «Rackmount Wiring Installation».
3.4. Rack mount Wiring Installation
This section explains:
-
Installation of the UPS, including connecting the UPS internal batteries;
-
Connection of all optional EBP(s).
3.4.1. Installation of the UPS
NOTE
: Do not make unauthorized changes to the UPS; otherwise, damage may occur to your equipment
and void your warranty.
NOTE
: Do not connect the UPS power cord to utility before the installation is completed.
Fig. 5 – Installing the mounting brackets
Fig. 6 – Securing the front of the module
