SPIRIT G XL 1-3 KVA - PF0.9 - UPS
www.visionups.com
17
4.2. Display Functions
In case of a fault or after 5 minutes of inactivity, the LCD display shows the output parameters.
The backlit LCD dims automatically its lighting intensity after 5 minutes of inactivity. Press any button to restore the screen.
The LCD display comprises a numerical value section and graphical sections for capacity, fan status and charger status. For
more details, refer to table 4.
TABLE 4 – LCD display
Section
Description
Graphic
Numerical
value
section
Corresponds to the numerical value of the inquiring items (output, load,
temperature, input, battery). As adjacent graphic shows, the output voltage is
220V and the output frequency 50Hz.
Capacity
graphical
section
Graphical display of the capacity of battery and load. Each square represents 20%
of capacity. As the adjacent graphic shows, the load reaches 80%-100% (5
squares) and the capacity of battery is 40%-60% (3 squares). When the UPS is
overloaded, the icon will light. When the battery is weak or disconnected, the
icon will also light.
Fan status
graphical
section
Indicates graphically if the fan works normally or not. When it works normally, a
dynamic rotating fan blade will be shown. When the fan works abnormally, then
the icon
lights as warning.
Charger
status
graphical
section
Graphical display of the charger status. When the charger works normally, then
the corresponding icon will vary dynamically and orderly. When the charger works
abnormally, then the icon remains flashing. When the UPS is in battery mode, the
number of icons of the charger status will vary according to the changeable
battery capacity (square).
