SPIRIT G XL 1-3 KVA - PF0.9 - UPS
www.visionups.com
18
4.3. Parameters Inquiring
Press and hold the scroll key
or
longer than ½ second (but shorter than 2 seconds) to inquire about the items. The
inquired items include input, battery, output, load and temperature. Press and hold the key
longer than 2 seconds and
the LCD begins to display the items circularly and orderly, transferring from one to another, every 2 seconds. Press and hold
the key again for some time, and it will return to initial status.
TABLE 5 – Parameters inquiring
Item
Description
Graphic
Output
Display of the output voltage and output frequency of the UPS. Adjacent graphic
shows an output voltage of 230V and an output frequency of 50Hz.
Load
Display of the numerical value of the active power (WATT) and the apparent
power (VA) of the load. As adjacent graphical example shows: the charge is 100
WATT and 100 VA (at disconnected load it is normal that the indicated
numerical value of WATT and VA is small).
Temperature
Display of the inverter temperature in the UPS. Adjacent graphic shows that the
temperature of inverter is 37°C.
Input
Display of the voltage and frequency of the input. The adjacent graphic shows
that the input voltage is 210V and the input frequency is 49.8Hz.
Battery
Display of the voltage and capacity of the battery. Adjacent graphic shows that
the battery voltage is 38V. The battery capacity is at 100% (it has been reckoned
approximately according to the battery voltage).
Remaining
battery
autonomy
Display of the remaining autonomy time of battery when the UPS operates in
battery mode. The number of minutes is from 0 up to 999. Adjacent graphic
shows the example of 686 minutes remaining for discharge.
System
Software
Version
Display of the system software version. Adjacent graphic shows that the system
software is the version 04.
