Vintage Air 1967-68 CAMARO w/o Factory Air Gen IV, Руководство пользователя

Страница: 5 / 18

5
www.vintageair.com
905168 REV G 4/13/15, PG 5 OF 17
Locate the OEM placard. Turn the placard over, and apply the white backing labels to the back side of the OEM
placard as shown in Figure 3a, below. NOTE: These white stickers are applied to the back side of the
control panel placard to balance the amount of light across the face of the control panel .
Install replacement placard mode label on the front side of the OEM placard.
Remove OEM light baffle (discard).
Install OEM backing plate, placard and control panel face plate. Secure control panel face plate to control panel
using (4) #8 x 1/2” pan head screws.
Reinstall knobs.
DASH
HOT
DEFROSTER
TEMPERATURE
DE-ICE
HOT
ON
FAN
AIR
OFF
OFF
HI
DAS
H
HOT
HI
ON
HOT
FAN
TEMPERATURE
DEFROSTR
COLD
OFF
OFF
Placard Installation (Cont.)
1.
2.
3.
4.
5.
Front Side of
OEM Placard
Backing
Labels
Back Side of
OEM Placard
Replacement
Mode Label
Control
Panel
Control Panel
Face Plate
(3) Knobs
Figure 3
Figure 3a
Bottom Side
of Control Panel
Shown
Placard
(4) #8 x 1/2”
Pan Head
Screws
OEM Light
Baffle
OEM Backing
Plate