4/60 NT00000658-TEDH-V-F400-ECOWATT-AN-210609
1.3 Acceptance – Storage
In case of missing items or delivery of non conforming, partially or totally damaged products, the Buyer
shall make, in accordance with article 133-3 of the French Commercial Code, reservations in writing on the
transporter receipt and confirm them within seventy-two (72) hours by registered letter along with a copy
addressed to the seller. Should the Buyer fail to make reservations when he receives the equipment, he
will not be allowed to make any future claim against us.
The product must be stored protected from the weather, shocks and dirt due to splashings or splatterings
of any kind during transport from the supplier to the end customer, and onto the worksite before installation.
1.4 Warranty
The equipment is guaranteed for 24 months from the invoice date. The warranty is limited to the replace-
ment of parts or equipment whose operation is recognized as defective by maker, excluding any com-
pensation or penalties. The costs of labor, removal and rest, travel related to the replacement are the
responsibility of the Customer. Excluded from our warranty are defects linked to abnormal use or not in
accordance with the recommendations in our instructions, defects observed as a result of normal wear
and tear, incidents caused by negligence, lack of monitoring or maintenance, defects due to incorrect
installation of devices or poor storage conditions prior to assembly.
In any case, maker is not responsible for transformed material, even partially repaired.
2. PRODUCT PRESENTATION
Range
•
Airflow from 200 up to 24 000 m
3
/h.
• 6 sizes : 355 / 400 / 450 / 500 / 630 / 710
Certification
EC Certificate F400-120 No. 1812-CPR-1085, according to European Standard NF EN 12101-3.
Approved F400 120 (400°C 120min).
Construction
•
TEDH F400 ECOWATT
®
: horizontal discharge through 2 or 3 sides.
•
TEDV F400 ECOWATT
®
: vertical discharge through 2 or 3 sides.
•
Built-in display (option on variable airflow VAV or constant pressure controlled COP versions) dis
-
plays the airflow or pressure depending on the unit model.
• High performance backward fan in galvanised steel.
• Convergent/divergent inlet cones.
• Galvanised steel motor plate, frame and motor support.
• 4 lifting lugs.
• Protective grid in pre-painted galvanised steel sheet, grey 7024. Meshes in accordance with NF EN
ISO 12499.
• Arm covers and protection guards in pre-painted sheet steel, grey RAL 7024.
• Cap in ABS PMMA grey RAL 7024.
•
Vertical rejection version: addition of 3 deflectors in RAL 7024 pre-painted sheet metal delivered
assembled in the factory (model TEDV F400 ECOWATT
®
) or available as a kit for on-site installation
(KRVT).
Motor
• ECOWATT
®
motor, F class, 3 phases with remote IP55 controller :
-
VENTIDRIVE controller 1 phase power supply 230V 50/60Hz controller input for sizes 355 up to 450.
-
INVENTO controller 3 phases power supply 400V 50/60Hz controller input for sizes 500 up to 710.
•
Thermal protection fitted within the controller.
Controller supplied as an accessory for TEDH-V F400 ECOWATT
®
single-phase
• ETDZ A: Stand-alone remote touch ModBus control for controlling 1 unit.
• ETDZ R: Network touch remote ModBus control for controlling 2 to 32 units in a network.