manualshive.com logo in svg

ViM TEDH F400, Техническое руководство, Страница: 17 / 60

Поделиться
Скачать
ViM TEDH F400 Скачать руководство пользователя страница 17

 17/60 NT00000658-TEDH-V-F400-ECOWATT-AN-210609

4.3  Wiring of INTZ safety switch

Safety switch delivered factory wired and mounted.

Note: the safety switch is sized to be used in smoke extract application for a 400V three-phases or 230V 
single-phase 50/60Hz power supply. The switch is used to isolate the unit from the electrical network in 

case of maintenance operations, not to pilot the unit on/off.

Safety switch access

The switch is located next to the controller. To facilitate the wiring of the switch remove the visor.

TEDH / TEDV F400 ECOWATT

®

 One-phase

Motor controller

INTZ 

- Safety switch

VCHV-A 

- Pressure or airflow controller, in COP and CAV one-phase units

PTHV-A 

- Airflow display, in VAV one-phase unit with display

TEDH / TEDV F400 ECOWATT

®

 Three-phase

INTZ 

- Safety switch

Motor controller

PTHV-A

 - Airflow or pressure display,

in VAV and COP units with
display and CAV unit.

Содержание TEDH F400





























































Отзывы:

Нет отзывов