ViM TEDH F400 Скачать руководство пользователя страница 13 | Manualshive

Страница: 13 / 60

ViM TEDH F400 Скачать руководство пользователя страница 13

13/60 NT00000658-TEDH-V-F400-ECOWATT-AN-210609

3.4 Removing the caps

To remove the caps :

• Raise the cap slightly upward.
• Pull the cap outward.

The plastic top cap does not have to be removed.

3.5 Mounting the roof fan

The support surface, which will support the roof fan base, must also be as flat as possible (embedding

frame or roof adapter supplied on request). A foam seal, or equivalent (not supplied), is recommended
between the support surface and the roof fan base. A maximum tilting of 2.5° between the motor axis and

the vertical is tolerated (see figure below).

LL

washer

Foam

seal

2,5°

The roof fan base must completely cover the support to ensure a good tightness.
Make sure that the support is adapted to withstand the combined weight of the machine and its various
accessories. Fasten roof fan using the 20mm dia. holes provided for this purpose. It is recommended to
use the LL washers.

If the fastening screws are not correctly tightened, it can lead to disturbing noises and vibrations. Once the
machine is correctly attached, make sure that the impeller rotates freely without rubbing or noise.

«
...
11
12
13
14
15
...
»

Содержание TEDH F400





























































Отзывы:

Нет отзывов