manualshive.com logo in svg

Viking VFR400, Руководство пользователя

Поделиться
Скачать
Viking VFR400 Скачать руководство пользователя страница 84

84

VFR-400 • 5403548 • REV W • 8/17

Zone 5 is a supervisory or abort  zone and can only be described as SUPERVISORY, TAMPER, LOW AIR or HIGH AIR, or ABORT.

              

SET          

 

Press the SET button to set the description displayed.

SELECT          

Press the SELECT button to scroll through the four supervisory and abort descriptions.

FUNCTION         

Press the FUNCTION button to skip to the next function.

Zone 6 is a supervisory zone and can only be described as SUPERVISORY, TAMPER, LOW AIR or HIGH AIR.

SET          

 

Press the SET button to set the description displayed.

SELECT          

Press the SELECT button to scroll through the four supervisory and abort descriptions.

FUNCTION         

Press the FUNCTION button to skip to the next function.

After describing what the supervisory zone is to be or skipping to the next function, the following will appear in the display window:

Output Description

This allows the user to describe the functions of the output circuits and whether they indicate first or second alarm, or release 

activated. Four descriptions are available:

1) ALARM INDICATING - Indicating appliances include bells, horns, strobes and other appliances used to indicate an alarm.  

These outputs are also programmable as first or second alarm when in chemical mode. The outputs programmed as first alarm 

will activate continuously upon activation of any alarm zone mapped to that output. Outputs programmed as second alarm will 

continue to operate in a continuous mode.

2) RELEASING - Releasing appliances include solenoids and other electrically compatible devices.

3) SUPERVISORY BELL - Appliances on this circuit are used to indicate the presence of a supervisory condition. Any zone  

    

    programmed as LOW AIR ALARM, SUPERVISORY, TAMPER, HIGH AIR or LOW AIR is automatically mapped to this output.

4) TROUBLE BELL - Appliances on this circuit are used to indicate the presence of a trouble condition. The user should describe  

    each output circuit in the same manner as the initiating circuit was described by pressing the middle button to select and the top  

    button to set the desired function.

              

SET            

 

Press the SET button to set the description displayed.

SELECT             

Press the SELECT button to scroll through the descriptions.

FUNCTION            

Press the FUNCTION button to skip to the next function.

 

                                                                                   

S U P

E

R V S R Y

2

Z

O N

E

S U P

E

R V I S R Y

O U T P U T

# 1

I N

D

I C A T I N

G

Содержание VFR400




































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды