Viking V36CO Series, Инструкция по установке, эксплуатации и обслуживанию

Страница: 14 / 40

©2009 Viking Commercial Division
14
7. Clean Drip Pan/Crumb Tray
•
Should be done last.
•
Remove from unit and clean in a sink of warm mild soap/degreaser water solution or ran
through the dishwasher.
•
Dry thoroughly when done prior to reinstalling in unit.
NOTE: To maintain luster of stainless steel surfaces apply a thin coat of stainless steel cleaner
and wipe with a clean cotton cloth.
Griddle, Plancha Top, Manual and Thermostatic
CAUTION
TO AVOID RISK OF DAMAGING UNIT
It is important to thoroughly clean the griddle and season it before using it for the
first time. Apply a thin film of oil to the griddle plate when not in use to preserve
its luster and to prevent it from rusting.
CAUTION
TO AVOID RISK OF PERSONAL INJURY, BURNS OR DAMAGING UNIT
Allow the griddle plate surface to cool before washing or rinsing. Hot steam can
cause injury. It may also damage the griddle plate. Care should be taken around
burner valves to prevent soap/degreaser from getting into valve body and mixing
with valve grease.
NOTE: Make sure the grease can / drip tray is placed properly in position.
1. Remove all food particles with a metal spatula from griddle surface.
2. Clean the griddle surface with a warm mild soap/degreaser water solution. Steel wool or
other like product can be used to assist in removing baked on food particles.
3. Rinse griddle top with a mixture of 1/4 cup of vinegar and one quart of water. Be sure to
thoroughly dry the surface.
4. Apply a thin film of cooking oil (do not use corn oil) to the entire griddle surface and heat
the griddle to 400º F.
5. When oil begins to smoke, turn the control knob to “Off” position. Allow the griddle to
cool.
6. When the griddle has cooled, wipe surface with clean burlap or any heavy coarse cloth.
Apply a light coat of cooking oil to the griddle plate.
7. Grease can / drip pan can now be removed and cleaned with warm soapy water in a sink
or ran through the dishwasher, thoroughly dry surface when done.
8. Remove knobs from thermostats (loosen set screws prior to removal); use a warm mild
soap/degreaser water solution and a moist sponge to wipe off front panel. Make sure
sponge is squeezed as dry as possible prior to use. Wipe surface clean with moist
sponge and clean water, thoroughly dry surface when done. Knobs can be cleaned in
sink with warm soapy water, do not use any solvents.
9. Reinstall knobs and tighten set screws.
10. Reinstall grease can / drip pan.
NOTE: Repeat steps 3, 4, and as needed until unit is cleaned to your satisfaction. A scouring
pad can be use to remove any tuff stains. Make sure to follow the grain of the griddle
plate to avoid any ruff scratches to the griddle plate.
NOTE:
To maintain luster of stainless steel surfaces apply a thin coat of stainless steel cleaner
and wipe with a clean cotton cloth.