34
Further installation on the cylinder module
The angle connector is supplied in the "Tower cylinder
connection set" box.
1.
4x
4x
3.
2.
4x
4.
Fig. 24
1.
Fit the angle connector on the cylinder module.
2.
Fit the supplied edge protector to the opening for
electrical cables.
3.
Route 2 cables with plugs
jF
and
aBH
out of the
cylinder module. Insert cables at the back of the
gas condensing and fuel cell module.
4.
Stick the spacer to the corners and in the middle of
the side panel.
Aligning the cylinder module at the installation site
Fitting accessories
Check prior to the final positioning whether all acces-
sories mounted from the back have been added. E.g.
connection set and (if available) DHW circulation con-
nection set
Installation sequence
Installing and aligning the Vitovalor PT2
(cont.)
5853335
Installation