Viessmann 7513244, Инструкция по установке и обслуживанию

Страница: 74 / 152

74
Coding in the delivered condition Possible change
Screed drying
F1:0 Screed drying not active. F1:1
to
F1:6 Only for heating circuit with mixer:
Screed drying adjustable, with
choice of 6 temperature/time profiles
(see page 119)
F1:15 Constant flow temperature 20 °C
Party mode time limit
F2:8 Time limit for party mode or exter-
nal operating program changeover
via button: 8 h
*1
Note
Observe settings for coding ad-
dresses "3A", "3b" and "3C" in
group
"General" , as well as "d5"
and "d8" in group "Heating cir-
cuit..." .
F2:0 No time limit.
*1
F2:1
to
F2:12
Time limit adjustable from 1 to 12 h *1
Start temperature raising
F8:–5 Temperature limit for terminating
reduced mode
–
5 °C, see example
on page 121.
Observe setting for coding address
"A3".
F8:+10
to
F8:–60 Temperature limit adjustable from
+10 to
–
60 °C
F8:–61 Function not active
End temperature raising
F9:–14 Temperature limit for raising the re-
duced set room temperature
–
14 °C, see example on
page 121.
F9:+10
to
F9:–60 Temperature limit for raising the set
room temperature to the value se-
lected for standard mode adjustable
from
+10 to
–
60 °C
Set flow temperature increase
FA:20 Raising of the set boiler water or
flow temperature by 20 % when
changing from operation with re-
duced room temperature to opera-
tion with standard room tempera-
ture. See example on page 122. FA:0
to
FA:50 Temperature rise adjustable from 0
to 50 %
Duration set flow temperature increase
Fb:60 Duration for raising the set boiler
water temperature or set flow tem-
perature (see coding address "FA")
60 min. See example on
page 122. Fb:0
to
Fb:300 Time period adjustable from 0 to
300 min.
*1 In the "Heating and DHW" program, party mode ends automatically when the system changes over to operation with
standard room temperature.
Code 1
"Heating circuit ..."
(cont.)
5773 238 GB
Codes