Viessmann 7513244, Инструкция по установке и обслуживанию

Страница: 70 / 152

70
Coding
Coding in the delivered condition Possible change
Burner service in 100 hours
21:0 No service interval set (in hours
run) 21:1
to
21:100 The number of hours run before the
burner should be serviced is adjust-
able from 100 to 10 000 h.
One adjusting step
≙
100 h
Service interval in months
23:0 No time set for burner service in-
terval 23:1
to
23:24 Interval adjustable from 1 to
24 months
Service status
24:0 No "Service" indication on the dis-
play
24:1 "Service" is shown on the display
(address is automatically set and
must be manually reset after a serv-
ice has been carried out)
Filling/venting
2F:0 Venting program/fill program inac-
tive 2F:1 Venting program active
2F:2 Fill program active
"DHW"
Select group "DHW" (see page 68).
Coding
Coding in the delivered condition Possible change
Set DHW temperature reheating suppression
67:40 For solar DHW heating: Set DHW
temperature 40 °C. Above the se-
lected set temperature, DHW re-
heating suppression is active
(DHW heating by the boiler only if
solar energy is insufficient). 67:0
to
67:95 Set DHW temperature adjustable
from 0 to 95 °C (limited by boiler-
specific parameters)
Observe setting for coding address
"56".
Enable DHW circulation pump
73:0 DHW circulation pump: "ON" ac-
cording to time program 73:1
to
73:6 During time program
"ON" from once per hour for 5 min to
"ON" 6 times per hour for 5 min
73:7 Constantly "ON"
"Solar"
Select group "Solar" (see page 68).
Code 1
"Boiler"
(cont.)
5773 238 GB
Codes